ELOTEX MP2050
C1/C2 tile adhesives, CG1/CG2 grouts, cement and gypsum renders, joint fillers.
View grade →
ELOTEX RDP — Anhui Liwei Chemical
ELOTEX RDP Powder
59 redispersible polymer powder grades for tile adhesives, renders, flooring and waterproofing.
- 59 grades in the series
- 13 core grades in stock
- EC1PLUS low-emission series
Redispersible polymer powder · spray-dried VAE
About the Company
Built for Consistency
Anhui Liwei Chemical supplies the ELOTEX RDP series to dry-mix mortar producers. Powder manufacture, quality control and formulation support are held to internationally recognized quality standards and to one released specification per grade.
Every grade is a spray-dried polymer powder that redisperses in water and forms a film inside the mortar. What changes across the series is the base chemistry, the minimum film forming temperature and the film hardness, and each of those decides which mortar system a grade belongs in.
Powder Manufacturing Control
Spray-dried polymer powders produced to a fixed specification, batch after batch.
Incoming and Outgoing QC
Residual moisture, ash content, bulk density and sieve residue checked against the released specification.
Research and Application Support
Formulation questions answered by the team that runs the powder trials.
Dry-Mix Dosage Guidance
Dosage ranges and mixing advice for tile adhesives, renders, flooring and waterproofing.
Stable Supply and Export Packing
Stock planning, pallet and container loading, moisture-protected export packing.
59Grades
11Series families
8Application areas
13Core grades in stock
Product Range
Compare grades
59 RDP Grades
13 core grades in stock, 11 series families covering every mortar system.
View grade
ELOTEX MP2050
Balanced adhesion and flexibility for C1/C2 tile adhesives.
VA/E · MFFT +3°C
View grade →
View grade
ELOTEX 60W
Rigid film for putty, skim coats and C1 adhesives.
VA/E hard · MFFT 12°C
View grade →
View grade
ELOTEX 80W
Impact resistance on EPS boards and flexible ETICS mortars.
VA/E high ethylene · MFFT 0°C
View grade →
View grade
ELOTEX FX2350
Crack bridging for ETICS base coats and C2 adhesives.
VA/E flexible · MFFT 0°C
View grade →
View grade
ELOTEX HD2000
Built-in water repellency for grouts and waterproofing.
VA/E hydrophobic · MFFT 0°C
View grade →
View grade
ELOTEX HD1500
Defoamed hydrophobic binder for dense tile grouts.
VA/VV hydrophobic · MFFT 0°C
View grade →
View grade
ELOTEX MP2070
Paper bond in gypsum joint compounds and large-format adhesives.
VA hard · MFFT 5°C
View grade →
View grade
ELOTEX MP2100
Fast redispersibility for thin-bed adhesives and grouts.
VA/E · MFFT +3°C
View grade →
View grade
ELOTEX FX7000
Saponification resistance for structural concrete repair.
Styrene-acrylic · MFFT 0°C
View grade →
View grade
ELOTEX FL1212
Dense slurries with low water uptake in repair mortars.
VA/VV · MFFT 5°C
View grade →
View grade
ELOTEX MP2701
One hard binder for cement and gypsum systems.
VA/E hard · MFFT 3°C
View grade →
View grade
ELOTEX ST2400
Rib stability for large-format tile bedding.
VA/E hard · MFFT 3°C
View grade →
View grade
ELOTEX ST2750
One grade across adhesive and render lines.
VA/E hard · MFFT 3°C
View grade →MP Series
5 gradesMultipurpose VAE grades: neutral rheology and hard films keep general-purpose formulations predictable.
ELOTEX MP2070
Gypsum board jointing compounds, large-format tile adhesives, repair and skim coats.
View grade →ELOTEX MP2100
Thin-bed tile adhesives, grouts, renders and gypsum joint fillers.
View grade →ELOTEX MP2104
Casein-free self-levelling compounds, pumpable flooring, cement and gypsum floors.
View grade →ELOTEX MP2701
Cement tile adhesives, grouts, non-structural repair, renders, gypsum joint fillers.
View grade →W Series
2 gradesClassic VAE grades: high-ethylene and high-MFFT options spanning rigid putty work and flexible ETICS.
ELOTEX 60W
C1 tile adhesives, CG1 grouts, gypsum and cement plasters, putty, non-structural repair.
View grade →ELOTEX 80W
ETICS adhesive mortar and base coat, C1 adhesives, CG1 grouts, repair mortar.
View grade →FX Series
12 gradesFlexible line: VAE, terpolymer and styrene-acrylic chemistry for ETICS, flexible tile adhesives and repair.
ELOTEX FX2350
ETICS and EIFS adhesive and base coats, C1/C2 tile adhesives, renders, non-structural repair.
View grade →ELOTEX FX2000
Polymer-modified renders, repair mortars and flexible tile adhesives.
View grade →ELOTEX FX1000
C1 tile adhesives, standard renders, non-structural repair mortars.
View grade →ELOTEX FX2311
Cement-based tile adhesives for interior and sheltered exterior use.
View grade →ELOTEX FX2320
EIFS adhesive and base coat, plasters, tile adhesives, repair mortars.
View grade →ELOTEX FX2322
Machine-applied EIFS adhesive and base coats, renders, tile adhesives.
View grade →ELOTEX FX2380
Spray-applied ETICS base coats with extended mesh embedding time, renders.
View grade →ELOTEX FX2630
Flexible cementitious waterproofing membranes, sealing slurries, repair mortars.
View grade →ELOTEX FX3300
C2TE anti-sag wall adhesives, trowel-applied renders, cement and gypsum floor products.
View grade →ELOTEX FX5600
High-quality C2 tile adhesives, large-format tiles, outdoor tiling, renders.
View grade →ELOTEX FX6300
C2S1, C2ES1 and C2TES1 tile adhesives, large-format tiling, renders.
View grade →ELOTEX FX7000
Rigid waterproofing membranes, structural and non-structural concrete repair.
View grade →HD Series
6 gradesHydrophobic line: hydrophobic groups that cut capillary water uptake in grouts, waterproofing and exterior renders.
ELOTEX HD1500
Tile grouts, rigid waterproofing membranes and renders.
View grade →ELOTEX HD1510
CG2 cement grouts, rigid waterproofing membranes, water-resistant joints.
View grade →ELOTEX HD2000
Tile grouts, cement and gypsum mortars, joint fillers, cement waterproofing coats.
View grade →ELOTEX HD2040
Tile grouts, EIFS details, renders and flexible repair mortars.
View grade →ELOTEX HD2301
Exterior renders, repair mortars and water-resistant plasters.
View grade →ELOTEX HD4500
ETICS adhesives, primer plasters, filler mortars, flexible tile adhesives.
View grade →FL Series
13 gradesFlooring and repair group: flow, defoaming and surface quality for levelling compounds, screeds and repair mortars.
ELOTEX FLEX8300
Flexible waterproof sealing mortars and high-flexibility repair slurries.
View grade →ELOTEX FLEX8320
Flexible waterproofing membranes, sealing slurries, high-flex repair mortars.
View grade →ELOTEX FL1210
Structural and non-structural concrete repair, high-strength repair mortars.
View grade →ELOTEX FL1212
Waterproof repair mortars, sealing slurries, dense renders, concrete repair.
View grade →ELOTEX FL1900
Floor levelling compounds, screeds and mineral-binder flooring.
View grade →ELOTEX FL2200
Cement-based self-levelling compounds and pumpable screeds.
View grade →ELOTEX FL2211
Pumpable self-levelling underlayments and cement-based levelling compounds.
View grade →ELOTEX FL2280
Gypsum and cement self-levelling compounds, screeds, pumpable flooring.
View grade →ELOTEX FL3210
Cement and gypsum self-levelling compounds, screeds, decorative floors.
View grade →ELOTEX FLOWKIT51
Self-levelling flooring, thin and thick screeds, spray-applied levelling, joint fillers.
View grade →ELOTEX FLOWKIT53
Self-levelling compounds, mineral-binder screeds and flooring primers.
View grade →ELOTEX FLOWKIT74
Self-levelling flooring compounds, screeds, repair mortars, tile adhesives.
View grade →ELOTEX CAST710
Gypsum-based self-levelling compounds and screeds, mineral-binder flooring.
View grade →ST Series
3 gradesTile and render group: hard bond with slip control, plus cement-lime render substrate fit.
ELOTEX ST2400
Large-format tile adhesives, tile grouts and cement-lime renders.
View grade →ELOTEX ST2401
Cement-lime renders, tile adhesives and standard plasters.
View grade →ELOTEX ST2750
Tile adhesives, cement-lime renders and standard plasters.
View grade →AD Series
2 gradesGypsum jointing group: paper bond and trowelling feel for joint compounds, including cold and humid conditions.
ELOTEX AD0110
Gypsum and limestone joint fillers, trowelling compounds and skimming.
View grade →ELOTEX AD0100
Gypsum and limestone joint compounds, trowelling and skimming.
View grade →CF Series
1 gradeCement-free decorative group: formaldehyde-free acrylic for decorative and texture coats.
ELOTEX CF9000
Interior and exterior decorative finishes, base and texture coats for ETICS, skim coats.
View grade →4-Digit Series
2 gradesClassic flexible grades: long-standing flexible formulations for adhesives and insulation board bonding.
ELOTEX 10211
Flexible tile adhesives, ETICS adhesive and base coats, renders.
View grade →ELOTEX 10166
Flexible tile adhesives, adhesive mortars and non-structural repair.
View grade →Additives
12 gradesFunctional additives: powder silane hydrophobing, efflorescence control, open time extension and adhesion promoters.
ELOTEX SEAL80
CG1/CG2 cement grouts and water-repellent mortars.
View grade →ELOTEX SEAL81
Tile grouts, rigid waterproofing membranes, concrete repair and renders.
View grade →ELOTEX SEAL200
CG1/CG2 cement grouts, rigid waterproofing membranes, concrete repair.
View grade →ELOTEX SEAL712
Gypsum-based trowelling and jointing compounds, interior humid areas.
View grade →ELOTEX ERA100
Tile grouts, non-structural concrete repair and renders.
View grade →ELOTEX ERA200
Coloured tile grouts, renders, putties and exterior decorative mortars.
View grade →ELOTEX OTA100
Tile adhesives, renders and trowel-applied mortars.
View grade →ELOTEX OTA200
Flooring compounds, screeds and renders.
View grade →ELOTEX PAD2
Cement-based ETICS adhesive mortars for polystyrene boards and base coats.
View grade →ELOTEX PAD3
EIFS adhesive mortars and base coats, polystyrene bonding.
View grade →ELOTEX ELOSET542
Gypsum-based trowelling and jointing compounds, filler materials.
View grade →ELOTEX SRT100
CG1/CG2 cement grouts, stain-resistant joints and rigid waterproofing.
View grade →TITAN Series
1 gradeAcrylic high-strength grade: dry and wet bond strength for rigid waterproofing and structural repair.
ELOTEX TITAN8100
Rigid waterproofing membranes, structural concrete repair, high-strength mortars.
View grade →
Typical Properties
Property Reference
The parameters below are the ones a dry-mix formulator checks first. Values differ by grade; the comparison page sets out the released data grade by grade.
| Polymer base | Vinyl acetate-ethylene, vinyl acetate-versatate, styrene-acrylic, acrylate |
|---|---|
| Protective colloid | Polyvinyl alcohol |
| Appearance | White to off-white powder |
| MFFT | 0 °C to +12 °C, depending on grade |
| Bulk density | 400 to 700 g/L |
| Residual moisture | 1.0 % maximum |
| Ash content | 9.0 % to 15.0 % |
| pH | 4.5 to 12.0 (10 % dispersion) |
| Film properties | Flexible to hard, depending on grade |
Typical values, not for specification.
Applications
Where It Performs
Eight application areas, and the grades that do the work in each of them.
01
02
03
04
05
06
07
08
Tile Adhesives
C1 to C2TE adhesives with the open time and slip control the trowel expects.
MP2050 · FX2350 · ST2400
Renders and Plasters
Cement, lime and gypsum renders that keep their film once the water has left.
60W · ST2750 · HD2301
Self-Levelling and Screeds
Flow, defoaming and surface quality in pumpable levelling compounds.
FL2200 · FL2211 · FL3210
ETICS · EIFS
Adhesive and base coats on EPS and XPS boards, with mesh embedding time.
FX2350 · 80W · FX2380
Tile Grouts
Dense CG1 and CG2 grouts built on defoamed, hydrophobic binders.
HD1500 · HD2000 · HD1510
Waterproofing and Sealing
Flexible membranes and sealing slurries that bridge cracks instead of following them.
FX2630 · FLEX8300 · FL1212
Concrete Repair
Structural and non-structural repair where alkaline resistance and bond strength matter.
FX7000 · FL1210 · TITAN8100
Gypsum Joint Compounds
Paper bond and trowelling feel in joint fillers and skim coats.
MP2070 · AD0110 · ELOSET542
One binder family, eleven chemistries — matched to the mortar system you actually produce.
Talk to a specialist
Why Work With Us
Batch records per delivery
Support That Scales
Powder supply is only half of the order. The other half is knowing what the powder does in your own formulation, at your own dosage.
Batch Consistency
Each delivery carries its released specification: the same MFFT, ash content and bulk density as the sample you trialled.
Formulation and Dosage Support
Dosage ranges and mix adjustments reviewed against your own recipe, not a generic starting point.
Low VOC and Eco-Label Fit
Grades in the series keep EC1PLUS and comparable low-emission declarations within reach.
Multi-Substrate Adhesion
Cement, gypsum, EPS, XPS and mineral substrates covered from one grade family.
Export Packing and Lead Time
Pallet and container loading with moisture protection, timing confirmed in the quotation.
Samples and Technical Data With the Order
Sample bags and the technical data sheet travel with the delivery, so the plant can verify before batching.
Technical Notes
All news
Latest Insights
Technical
ELOTEX MP2050 Bond Strength in C1/C2 Tile Adhesives
Tensile and shear bond development, substrate effects and the dosage ranges behind them.
Read more →
Knowledge
ETICS Mortar Design: Adhesive, Base Coat, Top Coat
The three mortar layers of an ETICS system and the binder each layer needs.
Read more →
Commercial
ELOTEX FX2350 Quotation Guide for Producers
The information that makes an FX2350 quotation accurate, and the spec points worth confirming in writing.
Read more →
Packaging and Delivery
Packed for Export
Bagged lines, big-bag plants and bulk intake are all served from the same stock, with moisture protection from filling to unloading.
25 kg paper sacks
PE-lined paper sacks for pallet and bagged-line dosing.
Big bags
FIBC big bags for plants that batch powder by weight.
Bulk supply on request
Drummed and bulk formats for high-volume production lines.
- Pallet and full-container loading on every order.
- Lead time and minimum order quantity confirmed in the quotation.
- Store dry below 25 °C and use within 6 months of delivery.
- Export documentation prepared with each shipment.
FAQ
Common Questions
How do I choose a grade?
Start from the mortar system: tile adhesive, render, flooring or waterproofing. The comparison page lines up MFFT, ash content, bulk density and typical applications so the shortlist is a few lines long.
What is the minimum order quantity?
MOQ and lead time are confirmed in the quotation, because both depend on the grade, the packing format and the season.
Can I test a sample first?
Sample bags are available so the powder can be trialled in your own formulation, at your own dosage, before a bulk order is placed.
How should the powder be stored?
Keep bags dry and below 25 °C and use the material within six months of delivery. Powder that has compacted in storage normally breaks up again during mixing.
What matters when mixing?
Shorten the mixing cycle for thermoplastic grades, avoid high shear that raises the mix temperature, and let the mortar stand for 1 to 5 minutes before use.
Do you handle export documents?
Export documentation and multilingual product information are arranged with each order; this site is published in thirteen languages.
Contact
Talk to a Specialist
Send the mortar system, the grade you are considering and the volume you plan for. The reply comes back with a dosage recommendation and a quotation.
Fred Wang
Sales
- Phone+8615380400285
- WhatsApp+8615380400285
- SkypeFred Wang
- Emailsales2@liwei-chem.com
Scan to reach Fred Wang on WhatsApp
